Installation:

Connect the network cable. Connect the NET-PwrCtrl to the mains.
The LED flashes rapidly for the first 3 seconds and then at the secondary speed.
Since most networks have a DHCP server (also available in a DSL router), the network setting is automated.

Start the Internet Browser with address: http://net-control

User: admin
Password: anel

If the NET-PwrCtrl does not show up, please check whether DHCP server is present in the network or continue with the instructions "Without DHCP".

The program NET-PwrCtrl Discoverer.exe searches for all NET-PwrCtrl on the network.

Since most networks have a DHCP server (also available in a DSL router), the network setting is automated. After switching on the NET-PwrCtrl, the DHCP function ensures that all the necessary parameters are included in the NET-PwrCtrl.

The NET-PwrCtrl can now be accessed via browser with the address:
http://net-control

Connect the NET-PwrCtrl and assign the following parameters to the network card:

IP: 192.168.0.1;
Subnet Mask: 255.255.255.0.

The NET-PwrCtrl can now be accessed via browser with the address:
http://192.168.0.244 or http://net-control
and set as required.